Q:How do I reset my Hikeep Ebike?

A:Hello, DEF is the option to restore factory default parameter settings. dEF-Y indicates that default parameters need to be restored, while dEF-N indicates that default parameters do not need to be restored. Under the condition of 0 speed on the main interface, press and hold the "headlight button switch" and "+" keys for more than 2 seconds to enter the interface for restoring factory default parameters. Use the short button "+/-" to switch. If Y is selected, press the short button "i" to confirm. The instrument panel will display dEF-0 for a period of time and automatically start restoring factory default settings. After the restoration is completed, it will automatically exit and return to the normal display interface.

4 comments

  • Karrie Wolfelschneider
    • Karrie Wolfelschneider
    • September 24, 2025 at 11:27 pm

    Im try to rest the bike and its not working i held the plus sign in the light button for 2 seconds and nothing happened.I tried to hold it for more seconds and still nothing happened.All that happens is the light turns on

  • Nora Hawley
    • Nora Hawley
    • September 6, 2025 at 5:05 pm

    Does the Hikeep K6 LCD display + Control System Set have an option in the P settings menu to have throttle only not pedal assist?

  • Clarence Nevins
    • Clarence Nevins
    • August 9, 2025 at 12:55 am

    My bike locked out at 17.5 mph full battery after I supposedly unlocked it. What is locked out on this speed for, it was just going 30 mph

    Hi keep k6L I unlocked it before now it’s just stuck at 17

  • Kyle Moulton
    • Kyle Moulton
    • August 9, 2025 at 12:13 am

    Holding the headlight button and + button for 2 seconds is not pulling up the DEF screen. How do you get the def setting to come up.

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.